Log In
I finished my squirt about two years ago and since then it has been well used,
in fresh but mainly salt water (port phillip bay). The frames are hoop pine. The hull is marine ply that has been covered with fiberglass cloth. After that I used international interprotect then three coats of two pac perfection paint which hardened well and still looks like new.
The steering I used a teleflex rack and pinion and the motor is a 15 hp mercury which is pull start with a stop button located on the dash.
It get lots of attention when we go out even from the water police!
If you enjoyed this article, please consider sharing it!
Hi! Welcome to Glen-L!
Connect with us:
Recommended:
2 Responses to My Squirt
Just started my squirt. Hope mine will look as good as yours. The working boat name is MI NAUTI TOY. I’ m a michigan boater Hence the MI. I love that you get a lot of attention. I built a ceader strip canoe and people want stop and look even when its on top the van.
Squirts are a kick. Easy to build. Quick. Great to look at. Fun ride. And a true attention getter.