Log In
Latex Paint for Boats by Dave Carnell When I bought my first yacht (27′ auxiliary sloop) for $300 in 1951 I quickly learned that if it’s for a boat, the same material costs several times as much as if it is for your house. Oakum was $1/lb. at the marine supply store compared to five […]
Using the Versatile Block Plane Roundovers Edges are simple to shape with the block plane. For chamfers less than 1/8″ you can usually eyeball the cut as you move the plane along the edge of the board. For wider chamfers, first draw a layout line on the workpiece as a guide. Flush Trimming There […]
With the interior carpentry completed, everything was removed so that pieces of plywood could be sent off to the trimmers to be made into real seats and large numbers of ceiling planks varnished. With the insides of the boat once more accessible, flotation foam was installed. In Australia, there is a statutory requirement for flotation […]
A frequent question we hear: “I can’t get mahogany, white oak or spruce as recommended in your plans; can I use poplar?” Answer: Boats have successfully been built using all sorts of woods that are not recommended for boat building. But when we’re asked to recommend a wood or alternative wood, we pick from a […]
For over 60 years, we’ve strived to provide the best plans and patterns we can so that beginning builders can build their own boat and have something that performs beautifully and that they can be proud of. Over the years, we’ve developed guidelines on changing a design so that first, the change is within the […]
Connect with us:
Recommended:
