Log In
Add Your Photos
May 21, 2019 - The boat is sixteen years old now and still in great shape. I chose a smaller lug rig for its ease of use, simplicity, compactness, and that there's usually an excess of wind in Coos Bay. My eldest son, Jim, is at the helm with our idiot standard Poodle, Toulouse, for its maiden voyage.
1 Photos
June 2016 55 years after building my Glen-L Ski Tow I built another Glen-L.
1 Photos
Updated Feb 1, 2019 7 April 2014 I finished (finally) the build of my Sabotina "Scrappy". The name comes from the fact that I built it from scraps from the Glen-L 14 build and other pieces around the shop. I've attached a few pics of launch day back in January 2017 at which my son, daughter-in-law, and two granddaughters participated.
12 Photos
December 2013 Great project to get started in boat building and it can be done in your basement!
126 Photos
October 2013 Here is a picture which I hope gives you some idea of how the wheels are bolted to the 2" Mahogany frame of the boat's transom. The small eyebolt located half way along the brown stained 2X4 lumber is for roping the boat to the vehicle should it be felt necessary to do so. In fact two ratchet tie-downs alone have proven sufficient for transporting Sabotina to and from the lake.
6 Photos
May 20, 2013 It was a fun and easy build. I built the boat because I sailed one as a small boy in Michigan. They are great handling little boats. She will be used as a mooring tender and to teach my kids how to sail. Thanks for the nice plans and hardware.
12 Photos
January 8, 2013 Thought you might like to see a few photos of my Sabotina (Standard Version) finished in early September of 2012. We towed it behind a sailboat on a cruise to Catalina in late September, 1st MDR to Two-Harbors, then Avalon, back to Two-Harbors, and finally back to MDR. It tows great, next time I hope to have a cover for it and the sail rig, dagger board and rudder finished. It rowed great with my wife and I and dive gear for two (no tanks), no need to screw around with a motor, gas, etc.
7 Photos
Sabotina by D. Erich "Mouse" Marse, Whittier, California 9 July, 2009
8 Photos
Sabotina #2 by James Haan, Benicia, California 26 March 2010 I just finished my second pram, this one is natural mahogany.
4 Photos
May 3, 2018 Update - Two are done, two are very close, and the others are in various states behind. i've attached a photo of the one Adi (my daughter) and I built. October 2016 The Sabotina builds are coming along. One is almost done and four more are getting closer every day. Should have a fleet or 8 or 9 when all is said and done.
15 Photos
18 Responses to Sabotina Design
Leave a Reply
Connect with us:
Recommended:
Could you please post some information about the holding jig?
Retired, armed ,looking to keep in shape ,no longer ,working,did a hobby to enjoy,my life ,live by lake need to build a boat …
Can you add me to your mailing list?
We went with bolt ropes in our sails. Sailrite can hook you up with a kit.
With a sock type sail as on the Sabotina, what do you do if you have to lower the sail when you are out on the water like if the wind picks up?
You wouldn’t be able to lower the sail unless you dropped the mast.
Es posible conseguirlo pre-cortado. (kit)
We don’t have a wood kit for the Sabotina but we do have other kits available for this design on our site.
cant figure out to line up the bow & transom what is the key
Bobby, the drawing of the building form shows the location of the transom and bow and forms–these are all positioned with set-up levels matching and at the angles noted.
Is there any one in Alabama or Georgia who has built one would like to contact them for info
need all the help I can get
Is plans for this boat available?
Of course the plans for this Glen-L design are available. Just go to the Glen-L.com home page or just to the top of this page, hover your pointer over “Online Catalogs” and when the dropdown appears click on the “Boat Plans Catalog – 300 Boats You Can Build” link. Then you can find the Sabotina design in either the Alphabetic List or the “Sailboats” links.
Is drawing w/dimensions available for this boat and if so where can I get the plans for it?
Thanks, Emil
Great pics. I love this boat. And recently help a friend build Sabotina. I should organize some of my pics, and share them.
I like the idea of assembling the bow and stern transoms without the plywood attached in order to fit the stringers and then apply the plywood later. I think the Kreg jig may be useful to hold the frames together until the plywood is installed!
NICED PROJECT