Archives

Sea Knight build

On April 5, 2021, in Builder Blogs, Power Cruisers, by Adriaan
17

Hi All, I recently bought/acquired the Sea Knight plans and decided to document and post some of my progress, although I am not sure if the build will be a speedy process as I have too many hobbies and things going on but I really enjoy it so far so let’s see. I just finished […]

Bronze vs. Stainless for Building Boats

On November 1, 2019, in Builder Tips, News From Gayle, by Gayle Brantuk
1

by Mark Bronkalla NOTE: Be sure to get your bronze and stainless fastenings from Glen-L! Every so often, boatbuilding points out that the correct answer to a problem is not always the obvious one. There have been many questions regarding which type of fastener is best; whether galvanized, bronze or stainless. This is complicated by […]

Glen-L Riviera Build By Donald Collier – Cookeville TN – Build Summary 10-1-15 Thru 5-7-16

On April 16, 2019, in Builder Blogs, Inboard Powered, Outboard Powered, by Donald Collier
12

This blog documents progress from 10-1-15 Thru 5-7-16.  See the second blog that documents progress from 5-7-16 to date.  The following Link will take you to the Riviera build part two.  Riviera Part Two Progress 10-1-15 Thru 5-7-16 The featured image is not the Riviera, but is close.  I will be increasing the Riviera length […]

First attempt at making a steel boat, the Goliath-Pt 4

On January 21, 2019, in Power Cruisers, Steel Construction, by Dan Hennis
5

You can read Part One of this blog here Part Two is here Part Three is here 15 December, 2018- Wow, time seems to fly these days. Since my last update, I got the pair of gensets, removed them from their frames, and started figuring out how I was going to get them in below […]

Titan Tug to take to the waters of Georgia Strait

4

Latest additions to the Blog   A note on the blog notes; I’m building the blog notes – latest at the top, oldest at the bottom.  So if something doesn’t make sense, scroll down and pick the story up where it starts, then work your way back to see where it finishes.  I am also […]