Log In
by Jeff Cobb aka BayouBengal Note: This is taken from the Glen-L Boatbuilder Forum–this is THE place to connect with others building Glen-L designs… I guess everyone has their own finish and like what they’re used to working with, but I’m now completely sold on the SystemThree WR-LPU system. You can pretty much apply it […]
By Ken Schott (Reprinted from the Boatbuilder Forum, August 9, 2016 – “Boat painting is a puzzle for newbies”) I’ll post my views on spray painting, if it might help you. Urethane paint is chemically a type of paint, a true urethane paint dries with a chemical reaction (the hardener) whereas enamel paint is air […]
I finished my squirt about two years ago and since then it has been well used, in fresh but mainly salt water (port phillip bay). The frames are hoop pine. The hull is marine ply that has been covered with fiberglass cloth. After that I used international interprotect then three coats of two pac perfection […]
Connect with us:
Recommended:
