Log In
by Mark Bronkalla NOTE: Be sure to get your bronze and stainless fastenings from Glen-L! Every so often, boatbuilding points out that the correct answer to a problem is not always the obvious one. There have been many questions regarding which type of fastener is best; whether galvanized, bronze or stainless. This is complicated by […]
by Mark Bronkalla Every so often, boatbuilding points out that the correct answer to a problem is not always the obvious one. There have been many questions regarding which type of fastener is best; whether galvanized, bronze or stainless. This is complicated by the lack of readily available bronze vs. the ready availability of stainless. […]
Hi fellow boatbuilders, I used the blueprints for the hull and added a fore and aft deck for floatation and storage. The middle rowing bench encloses 4 semitraction batteries and the drive and control head for the motor. I used a 80 pound minn kota electric motor built into the rudder which will drive the […]
Sometimes it helps to go back to the basics whether it’s with marketing a business or building a boat. We are frequently asked what you need to get started building your own boat. So, I thought it would be a good idea to spell out for you what you need to get started. Let’s say […]
Connect with us:
Recommended:
