Log In
To read the previous posts in this series, click the links below: Part 1 Part 2 Part 3 Part 4 December 14, 2011 This week I have installed the carlings. The plans call for anchoring them to the bow piece, then bend back into the frame notches and into the transom. I found that doing […]
To read the previous posts in this series, click the links below: Part 1 Part 2 Part 3 December 2, 2011 I haven’t accomplished much lately as I am waiting for the mahogany for the coamings, sheers and carlings. It’s supposed to be here by Dec. 6th, but that is not cast in stone. I […]
To read the previous posts in this series, click the links below: Part 1 Part 2 Wednesday, November 23, 2011 I completed fitting up the frames into the chine/bottom assembly and have been sanding and gluing them in this week. I leveled out the bottom and did frame 1 and 3 yesterday. Today I did frame […]
I started the boat build in October of 2009 and launched July 20, 2011. Details of the build are at http://artatkinson.blogspot.com The boat was stretched 10% to 11′. Outboard is an original 1956 Mercury Mark 25 in Sarasota Blue/Sand Tan colors. The motor is 20 HP […]
Here’s my Celerity build. Started the weekend of The Gathering 2011 (9/16/2011). Frame 1: I used a slightly modified frame build process. I created filler blocks for all joints where the gussets would be. Used a biscuit joiner to join all the sections. This made the assembly and lineup very simple […]
Connect with us:
Recommended:
