Plywood boats are commonly built by two methods, conventional and Stitch and Glue. Conventional plywood boatbuilding has been used since plywood became practical for boat use. It’s a modification of the methods used for the old conventional planked boats that seem to last forever. Although most think Stitch and Glue is new, it has been around quite […]
Here at Glen-L, we’re grateful to get to know many of you who have built our boats but usually we only meet by phone. At the annual Gathering of Boatbuilders, we actually get to meet many of you in person and Ray Macke is one such person. He came to the very first Gathering in […]
by Cliff Steele (originally written for Heartland Boating) Forty years ago this month we built “TUFFY” our first boat…but, before I tell you about TUFFY, I must go back 50 years. I was 12 back then & enjoyed a hobby that later would lead me and introduce me to a life long relation with boating. […]
Hi everybody After roughly one year of intermittent – I was still working at the time – building my new Power Skiff 14, I was able to launch the boat in August and have it officially approved and tested by the relevant Swiss naval authorities (don’t laugh, landlocked Switzerland, in my case the Canton of […]
Figuring out how to cut the angle on a transom can be a little challenging. Joshua Burks is currently building our Zip which is a 14′ runabout that has a 12 degree angle on the transom as do many of our designs. Joshua is documenting his build with video. He’s done a really good job […]