Archives

First attempt at making a steel boat, the Goliath-Pt 5

On December 21, 2020, in Builder Blogs, Steel Construction, by Dan Hennis
2

You can read Part One of this blog here Part Two is here Part Three is here Part Four is here November 23, 2020 OK all, it has been some time since the last update, but there have been extenuating circumstances. Most of them centered around the need for a bigger building space. To be […]

Building A Goliath By Ed Davis PT2

On October 31, 2019, in Aluminum Construction, Builder Blogs, Power Cruisers, by Chief Ed
2

This is part two of Ed’s building of the Glen-L Goliath, an 18 foot tug cruiser which he is building in aluminum. Boat plans and patterns for this design are available from Glen-L Marine in our online catalog. You can read Part 1 of Ed’s blog on our site. Hurricane “Dorian”, has passed. The eye […]

Building A Goliath By Ed Davis

5

Being New to the Glen-L Family I guess I should start with how I came to this point of life. Some where in the South Pacific on a Navy ship around 1965 I found a Glen-L Ad for plans in a magazine. I wanted to build just the right boat to fit Me and my […]

First attempt at making a steel boat, the Goliath-Pt 4

On January 21, 2019, in Power Cruisers, Steel Construction, by Dan Hennis
5

You can read Part One of this blog here Part Two is here Part Three is here 15 December, 2018- Wow, time seems to fly these days. Since my last update, I got the pair of gensets, removed them from their frames, and started figuring out how I was going to get them in below […]

First attempt at making a steel boat, the Goliath-Pt 3

On July 5, 2018, in Builder Blogs, Power Cruisers, Steel Construction, by Dan Hennis
4

You can read Part One of this blog here Part Two is here To read the newest post of June 29, 2018 click here Feb. 2, 2018 – Installed the fantail deck edge angle. I had to notch the 1/8″ X 1″ angle to match the curve of the boat. Finished forming and installing the aft […]