Log In
This is the third blog on my Riviera build. Below are links to the first and second blogs. https://boatbuilders.glen-l.com/43852/glen-l-riviera-build-by-donald-collier-cookeville-tn-build-summary-part-2/ November 1 – November 30, 2019 – Started installing the gas tank. I ordered a Moeller 25 gallon inboard gas tank with the mounting clips. The clips secure the gas tank from moving but allow for […]
(Note: if you want to read this in sequential order, start from the bottom) I started building the Riviera in October of 2015. I have been writing a blog from the beginning documenting the progress. The blog was getting very long very slow for me to update. The first blog documents progress from October 1, 2015 to […]
Building the Riviera was a very long journey. You will find pictures in my Gallery that show it starting a long while back. It took two phases. Phase one, in the first home and shop took me to the completion of the hull. Phase two finished the boat in my second home and shop. By […]
This blog documents progress from 10-1-15 Thru 5-7-16. See the second blog that documents progress from 5-7-16 to date. The following Link will take you to the Riviera build part two. Riviera Part Two Progress 10-1-15 Thru 5-7-16 The featured image is not the Riviera, but is close. I will be increasing the Riviera length […]
Just a few pics of my Barrelback which I completed in October 2015 using Glen L plans. The boat runs a Ford pcm 351W engine which I built from the ground up.The steering is hydraulic which in retrospect was overkill but nice to have.I also fitted a hydraulic engine hatch lifter which makes small adjustments […]
Connect with us:
Recommended:
