Log In
A $10 – 10 Minute Steam Box by Jack Dice, Stonington, Maine I needed to bend some wood the other day. I was installing new gunwhales and inwales on a fiberglass skiff (an old “Plastic Pete’s”) that was molded with a rounded bow as many of those fiberglass skiffs are. The original wood had rotted […]
The construction time was right around 480 hrs. The rigging was another 40 hours. The whole boat does not contain a piece of wood. It is all composite foam core/fiberglass/carbon panels (proset epoxy/vacuum bagged). I stretched it to 19’9″ LOA. The hull weighed in at 860lbs. I was pretty conservative in the amount of fiber […]
Latex Paint for Boats by Dave Carnell When I bought my first yacht (27′ auxiliary sloop) for $300 in 1951 I quickly learned that if it’s for a boat, the same material costs several times as much as if it is for your house. Oakum was $1/lb. at the marine supply store compared to five […]
Using the Versatile Block Plane Roundovers Edges are simple to shape with the block plane. For chamfers less than 1/8″ you can usually eyeball the cut as you move the plane along the edge of the board. For wider chamfers, first draw a layout line on the workpiece as a guide. Flush Trimming There […]
Connect with us:
Recommended:
