Log In
Did You Get Your Copy Of:
|
An Educational Service Provided by Glen-L Marine Designs.Get yours
by simply clicking the button below.
Did You Get Your Copy Of:
|
Did You Get Your Copy Of:
|
Did You Get Your Copy Of:
|
Did You Get Your Copy Of:
|
Two years ago I started the construction of a Glen-L 15. I have a blog with a lot of pictures. Sorry is in Portuguese http://construirumveleiro.blogs.sapo.pt/ You are welcome to visit… (Editor’s note: when we went to his blog, there’s a box that pops up and you can translate the page into your own language)
by Douglas Keith (Doug mentioned that he had used a Briggs in his boat, so I asked him to share how he did it since others have asked about converting smaller motors.) Here we go…The tough question you asked is “how would I tell someone how to do this”. Boy, when I thought about it […]
by Mark Bronkalla Every so often, boatbuilding points out that the correct answer to a problem is not always the obvious one. There have been many questions regarding which type of fastener is best; whether galvanized, bronze or stainless. This is complicated by the lack of readily available bronze vs. the ready availability of stainless. […]
Just a few pics of my Barrelback which I completed in October 2015 using Glen L plans. The boat runs a Ford pcm 351W engine which I built from the ground up.The steering is hydraulic which in retrospect was overkill but nice to have.I also fitted a hydraulic engine hatch lifter which makes small adjustments […]
Hi! Welcome to Glen-L!
Connect with us:
Recommended:
