Log In
Did You Get Your Copy Of:
|
An Educational Service Provided by Glen-L Marine Designs.Get yours
by simply clicking the button below.
Did You Get Your Copy Of:
|
Did You Get Your Copy Of:
|
Did You Get Your Copy Of:
|
Did You Get Your Copy Of:
|
by Mark Bronkalla NOTE: Be sure to get your bronze and stainless fastenings from Glen-L! Every so often, boatbuilding points out that the correct answer to a problem is not always the obvious one. There have been many questions regarding which type of fastener is best; whether galvanized, bronze or stainless. This is complicated by […]
This is part two of Ed’s building of the Glen-L Goliath, an 18 foot tug cruiser which he is building in aluminum. Boat plans and patterns for this design are available from Glen-L Marine in our online catalog. You can read Part 1 of Ed’s blog on our site. Hurricane “Dorian”, has passed. The eye […]
This year was the 13th Gathering of Glen-L Boatbuilders. A little background on this annual event may be in order. The idea of getting together started on the Glen-L Boatbuilder Forum around 2005. There are quite a few builders in the Alabama, Georgia, Tennessee area, so two of our Forum members, Dave Grason and Bill […]
Final Product Finally, after some finishing touches here and there, Pluto was finished. She drives and handles beautifully and the 30 HP gets it up to around 32 miles per hour. It has plenty of power for pulling a wakeboard, even with three people on board. Being such a small, light boat with a relatively […]
In this post I will discuss the building of the interior of my Glen-L Tuffy, Pluto. I will also discuss some things about the engine I bought for the boat. If you missed them, you can read Part 1 and Part 2 Interior The last stage of the build was to finish the interior of […]
Hi! Welcome to Glen-L!
Connect with us:
Recommended:
